View RCL0612_4989528.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

RCL e3
Vishay
Long Side Termination Thick Film Chip Resistors
FEATURES
* Enhanced power rating * Long side terminations * Protective overglaze * Pure tin solder contacts on Ni barrier layer, provides compatibility with lead (Pb)-free and lead containing soldering processes * Compliant to RoHS directive 2002/95/EC * Halogen-free according to IEC 61249-2-21 definition * AEC-Q200, rev. C compliant
STANDARD ELECTRICAL SPECIFICATIONS
SIZE MODEL INCH METRIC POWER RATING P70 W LIMITING ELEMENT VOLTAGE MAX. V TEMPERATURE COEFFICIENT ppm/K 100 RCL0612 e3 0612 RR1632 0.5 75 200 100 RCL1218 e3 1218 RR3246 1.0 200 200 5 5 1 1 to 2M2 E24 TOLERANCE % RESISTANCE RANGE E-SERIES E24 + E96 1 to 1M E24 E24 + E96
1
Notes * These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime * Marking: See data sheet "Surface Mount Resistor Marking" (document number 20020) * Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material
TECHNICAL SPECIFICATIONS
PARAMETER Rated Dissipation P70 (1) Limiting Element Voltage Umax. AC/DC Insulation Voltage Uins. (1 min) Insulation Resistance Category Temperature Range Weight UNIT W V V C mg 11 RCL0612 0.5 75 > 100 > 109 - 55 to + 155 29.5 RCL1218 1.0 200 > 200
Note (1) The power dissipation on the resistors generates a temperature rise against the local ambient, depending on the heat flow support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature of 155 C is not exceeded.
www.vishay.com 1
For technical questions, contact: thickfilmchip@vishay.com
Document Number: 20046 Revision: 04-Mar-10
RCL e3
Long Side Termination Thick Film Chip Resistors
Vishay
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: RCL061210K0FKEA(1)
R
C
L
0
6
1
2
1
0
K
0
F
K
E
A
SPECIAL Up to 2 digits
MODEL/SIZE RCL0612 RCL1218
VALUE R = Decimal K = Thousand M = Million 0000 = Jumper
TOLERANCE F=1% J=5% Z = Jumper
TCR K = 100 ppm/K N = 200 ppm/K 0 = Jumper
PACKAGING (2) EA EB EC EK
PRODUCT DESCRIPTION: RCL0612 10K 1 % 100 ET1 e3 RCL0612 MODEL RCL0612 RCL1218 10K RESISTANCE VALUE 10R = 10 10K = 10 k 1M = 1 M 0R0 = Jumper 1% TOLERANCE 1% 5% 100 TCR 100 ppm/K 200 ppm/K ET1 PACKAGING (2) ET1 ET5 ET6 ET9 e3 LEAD (Pb)-FREE e3 = Pure tin termination finish
Notes (1) Preferred way for ordering products is by use of the PART NUMBER (2) Please refer to table PACKAGING, see below
PACKAGING
REEL MODEL PACKAGING CODE TAPE WIDTH DIAMETER PITCH PIECES/ REEL 5000 10 000 20 000 4000 PART NUMBER PAPER 180 mm/7" RCL0612 RCL1218 8 mm 12 mm 285 mm/11.25" 330 mm/13" 180 mm/7" 4 mm 4 mm 4 mm 4 mm EA EB EC EK BLISTER PRODUCT DESC. PAPER ET1 ET5 ET6 ET9 BLISTER
DIMENSIONS in millimeters
T2 L H l W T1 b a
SIZE INCH 0612 1218 METRIC 1632 3246 L 1.6 0.2 3.2 + 0.10 - 0.20 W 3.2 0.2 4.6 0.15
DIMENSIONS H 0.55 0.1 0.55 0.05 T1 0.35 0.15 0.45 0.2 T2 0.25 0.15 0.4 0.2
SOLDER PAD DIMENSIONS REFLOW SOLDERING a 0.6 1.1 b 3.2 4.9 l 1.0 1.9 WAVE SOLDERING a 1.1 1.25 b 3.2 4.8 l 1.0 1.9
Document Number: 20046 Revision: 04-Mar-10
For technical questions, contact: thickfilmchip@vishay.com
www.vishay.com 2
RCL e3
Vishay
Long Side Termination Thick Film Chip Resistors
FUNCTIONAL PERFORMANCE
Derating
Rated Power in % 120 100
80 60 40
20 0 - 55
- 25
0
25
50
75 70
100 125 155 175 Ambient Temperature in C
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R) STABILITY CLASS 2 OR BETTER Stability for product types: RCL e3 4.5 4.7 4.13 Resistance Voltage proof Short time overload U = 1.4 x Uins; 60 s U = 2.5 x P 70 x R 2 x Umax.; Duration acc. to style Solder bath method; Sn60Pb40 non activated flux; (235 5) C (2 0.2) s 4.17.2 58 (Td) Solderability Solder bath method; Sn96.5Ag3Cu0.5 non-activated flux; (245 5) C (3 0.3) s 4.8.4.2 4.32 21 (Uu3) Temperature coefficient Shear (adhesion) Substrate bending (20/- 55/20) C and (20/125/20) C 45N Depth 2 mm; 3 times 30 min at - 55 C; 30 min at 125 C 5 cycles 1000 cycles (0.25 % R + 0.05 ) (1 % R + 0.05 ) (0.5 % R + 0.05 ) (1 % R + 0.05 ) Good tinning ( 95 % covered); no visible damage 1% No flashover or breakdown (0.25 % R + 0.05 ) (0.5 % R + 0.05 ) 1 to 1 M 5%
Good tinning ( 95 % covered); no visible damage
100 ppm/K No visible damage
200 ppm/K
No visible damage, no open circuit in bent position (0.25 % R + 0.05 )
4.33
21 (Uu1)
4.19
14 (Na)
Rapid change of temperature
www.vishay.com 3
For technical questions, contact: thickfilmchip@vishay.com
Document Number: 20046 Revision: 04-Mar-10
RCL e3
Long Side Termination Thick Film Chip Resistors
Vishay
TEST PROCEDURES AND REQUIREMENTS
EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R) STABILITY CLASS 2 OR BETTER Stability for product types: RCL e3 4.23 4.23.2 4.23.3 4.23.4 4.23.5 4.23.6 4.23.7 2 (Ba) 30 (Db) 1 (Aa) 13 (M) 30 (Db) Climatic sequence: Dry heat Damp heat, cyclic Cold Low air pressure Damp heat, cyclic DC load Endurance at 70 C 125 C; 16 h 55 C; 90 % RH; 24 h; 1 cycle - 55 C; 2 h 1 kPa; (25 10) C; 1 h 55 C; 90 % RH; 24 h; 5 cycles U = P 70 x R U = P 70 x R Umax.; 1.5 h on; 0.5 h off; 70 C; 1000 h 70 C; 8000 h Solder bath method (260 5) C; (10 1) s IEC 60695-11-5; 10 s (40 2) C; (93 3) % RH; 56 days 155 C, 1000 h IEC 61340-3-1* 3 pos. + 3 neg. discharges; ESD voltage: 1000 V Isopropyl alcohol; 50 C; method 2 Isopropyl alcohol; 50 C; method 1, toothbrush f = 10 Hz to 2000 Hz; x, y, z 1.5 mm; A 200 m/s2; 10 sweeps per axis U = 15 x P 70 x R 2 x Umax.; 0.1 s on; 2.5 s off; 1000 cycles U = 10 x P 70 x R 2 x Umax.; 10 pulses 1 to 1 M
(1 % R + 0.05 )
(2 % R + 0.1 )
4.25.1
-
(0.5 % R + 0.05 ) (1 % R + 0.05 ) (0.25 % R + 0.05 )
(2 % R + 0.1 ) (4 % R + 0.1 ) (0.5 % R + 0.05 )
4.18.2 4.35 4.24
58 (Td) 78 (Cab)
Resistance to soldering heat Flamability, needle flame test Damp heat, steady state Endurance at upper category temperature Electrostatic discharge (Human Body Model) Component solvent resistance Solvent resistance of marking Vibration, endurance by sweeping
No burning after 30 s (1 % R + 0.05 ) (1 % R + 0.05 ) (2 % R + 0.1 )
4.25.3
-
4.40
-
(1 % R + 0.05 )
4.29 4.30
45 (XA) 45 (XA)
No visible damage Marking legible, no visible damage
4.22
6 (Fc)
(0.25 % R + 0.05 )
(0.5 % R + 0.05 )
4.37
-
Periodic electric overload Single pulse high voltage overload, 10 s/700 s
(1 % R + 0.05 )
4.27
-
(1 % R + 0.05 )
All tests are carried out in accordance with the following specifications: * EN 60115-1, generic specification * EN 140400, sectional specification * EN 140401-802, detail specification * IEC 60068-2 environmental test procedures Packaging of components is done in paper or blister tapes according to IEC 60286-3
Document Number: 20046 Revision: 04-Mar-10
For technical questions, contact: thickfilmchip@vishay.com
www.vishay.com 4
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000 Revision: 18-Jul-08
www.vishay.com 1

▲Up To Search▲

Price & Availability of RCL0612

	To Download RCL0612 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .